Free Shipping in USA
on orders $20+
Free Shipping in USA on orders $20+

Matek Mini Power HUB with BEC 5V & 12V

Matek Mini Power HUB with BEC 5V & 12V

$ 6.0
$6 $10
-- Show Customizations -- -- Hide Customizations --
Free Shipping in USA
Orders $20+

Description

This Matek Mini Power HUB PDB was engineered to provide the best performance a small 36 * 36mm form factor PCB. It's sole purpose is to distribute power from a battery pack to all four ESCs, and also provide regulated DC outputs for powering your cameras and other electronics. It supposed 3S to 6S LiPo batteries and features a convenient solder bridge so you can chose which voltage you want for your camera and VTX.

Specs

  • Input voltage range (3S-6S operation): 9 - 26VDC
  • Regulated 5V and 12V outputs
  • LED power indicators ( 5V & 12V outputs )
  • 4 ESC outputs 

ESC outputs

  • Continuous current: 20A per output
  • Peak current (10 seconds/minute): 25A per output 

BEC 5V output

  • Designed for RC Receivers, Flight controllers, OSD, and Servos.
  • DC/DC synchronous buck regulator, Efficiency is up to 95%.
  • Voltage: 5.0 +/- 0.1VDC
  • Continuous current: 3 Amps
  • Short-circuit tolerant (10 seconds/minute)
  • LED (indicates voltage is in regulation) 

BEC 12V output

  • The battery should be 4S~6S LiPo
  • Standard output designed to power cameras and video transmitters,etc.
  • Voltage: 12.0 +/- 0.2VDC
  • Continuous current: 2 Amps (Max.3A 10s/minute)
  • Short-circuit tolerant (10 seconds/minute)
  • LED (indicates voltage is in regulation) 

CAM & VTX voltage bridge

  • 3S operation. choose “VCC” for 12V camera & 12V VTX, VCC=Battery Voltage.
  • 4~6S operation, choose “12” for 12V camera & 12V VTX
  • 3~6S operation, choose “5” for 5V camera
  • Video pass through from the “CAM” pad to the “VTX” pad 

Physical Specs

  • Dimensions: 36 x 36mm
  • Weight: 6g
  • Mounting holes 30.5mm square spacing